Repointing Cost UK 2026 — What You'll Pay Per Square Metre
How much does repointing cost in the UK? We break down real pricing per square metre, per wall, and per project type — based on actual rates charged by a brickwork specialist in 2026.
Daniel Rosser
Published 10 September 2026
One of the most common questions homeowners ask is: "How much will repointing cost?" It's a fair question — and the answer isn't always straightforward because pricing depends on several factors. But we can give you real numbers based on actual rates charged in the UK in 2026.
This guide uses real pricing from a working brickwork specialist serving Hampshire, Berkshire and Surrey. No inflated estimates, no vague ranges — just what you can actually expect to pay.
Repointing Cost Per Square Metre
The most common way to price repointing is by the square metre (m²). This makes it easy to compare quotes and understand what you're paying for.
| Service | Cost per m² | Notes |
|---|---|---|
| Rake out and repoint | £60 – £80 | Standard pricing for most residential walls |
| Brick cleaning | £5 – £10 | Additional cost, often done alongside repointing |
| Chimney repointing | £80 – £120 | Higher rate due to access — scaffolding always extra |
| Lime mortar repointing | £70 – £90 | Specialist work for period properties |
So for a standard residential wall needing repointing, you're looking at £60 to £80 per square metre. But what does that mean for your actual project?
Typical Project Costs
Here's what you can expect to pay for common repointing scenarios:
Single Wall (Semi-Detached House)
A typical side wall on a semi-detached house is roughly 20–30 m². At £60–80 per m², you're looking at:
- Low end: £1,200 (20 m² at £60/m²)
- High end: £2,400 (30 m² at £80/m²)
- Typical: £1,500 – £2,000
Full House Repointing
A typical three-bedroom semi-detached house has roughly 80–120 m² of external brickwork (depending on design and number of elevations). At standard rates:
- Low end: £4,800 (80 m² at £60/m²)
- High end: £9,600 (120 m² at £80/m²)
- Typical: £6,000 – £8,000
Chimney Repointing
Chimneys are priced higher per m² because of access difficulties. A typical chimney repointing job:
- Repointing cost: £400 – £800
- Scaffolding: Always an additional cost — budget an extra £500 – £1,000+ depending on height and access
- Timeline: 1–2 days (once scaffolding is up)
Scaffolding is never included in the repointing price — it is always quoted and charged separately. Always ask for the scaffolding cost upfront so you have the full picture before committing.
Garden Wall Repointing
Smaller, more accessible projects like garden walls are at the lower end:
- Cost: £300 – £600 (typical garden wall)
- Per m²: £60 (no scaffolding needed)
What Affects the Cost?
Several factors influence where your project falls within these ranges:
1. Access
Scaffolding is always an additional cost on top of the repointing price — it is never included. Ground-floor walls require no scaffolding and are cheaper. Upper floors, gable ends, and chimneys all need scaffolding, which typically adds £500 – £1,000+ to the total project cost depending on the size and height of the property. Narrow side alleys, overhead wires, or difficult terrain can push that higher.
2. Mortar Type
Traditional lime mortar repointing costs more than standard cement-based repointing because it requires specialist knowledge and takes longer. However, if your property is pre-1930, lime mortar is usually the correct choice — using cement mortar on an old property can cause serious damage.
3. Condition of Existing Mortar
If the old mortar is very hard to remove or if bricks are damaged and need replacing, the job takes longer and costs more. The rake-out stage (removing old mortar) is the most time-consuming part.
4. Brick Type and Joint Style
Some bricks and joint styles are more fiddly to repoint than others. Flush joints are quicker than weatherstruck or recessed joints. Glazed or engineering bricks require more care.
5. Location
Pricing varies across the UK. London and the South East tend to be at the higher end. The rates in this guide reflect Hampshire, Berkshire and Surrey — a mid-range area for UK pricing.
What's Included in a Proper Repointing Job?
A proper repointing job — not a cheap bodge — should include:
- Full assessment of existing mortar and brickwork condition
- Raking out old mortar to a proper depth (usually 15–20mm, or twice the joint width)
- Cleaning the joints of dust and debris
- Mixing the correct mortar for your property type
- Applying the new mortar in layers, compacting properly
- Finishing the joints to match the existing style
- Cleaning mortar smears from the brick face
- Site cleanup — leaving the area tidy
How to Get an Accurate Quote
Every property is different, so the best way to know your cost is to get a quote. Here's how to make sure you get an accurate one:
- Ask for a site visit — a proper quote requires seeing the job, not just photos
- Get the quote in writing — with a clear breakdown of what's included
- Ask about the mortar mix — a professional should be able to explain their choice
- Check insurance and credentials — always use an insured, registered business
- Beware quotes that are too cheap — if it seems too good to be true, it probably is
Want a Free Quote?
If you're in Hampshire, Berkshire or Surrey, Rosser Brickwork & Repointing Services Ltd offers free, no-obligation quotes. We'll assess your property, explain what needs doing, and give you an honest price — no pressure, no hard sell.
Free Tool
Work Out Your Own Repointing Cost
Put in your wall measurements and get a cost range built from the real rates on this page — £60–80 per m² — with scaffolding shown as its own separate line rather than hidden in the total.
Open the Cost CalculatorNeed a Professional?
Get a Free Quote from a Brickwork Specialist
If you're in Hampshire, Berkshire or Surrey, Rosser Brickwork & Repointing Services Ltd can handle your repointing, chimney repairs or brick restoration. Fully insured, free quotes, no pressure.