Free Tool

Repointing Cost Calculator

Most repointing calculators online use made-up national averages. This one uses the rates actually charged on real jobs in 2026 by Rosser Brickwork & Repointing Services Ltd — £60–80 per m² for rake out and repointing, £5–10 per m² for brick cleaning.

It also does the thing most quotes do not: it shows scaffolding as a separate line. Scaffolding is never included in a per-m² repointing rate, and knowing that before you start ringing round is the difference between a budget that holds and one that does not.

Step 1

What work do you need?

This determines scaffolding, which is always quoted as a separate cost.

Your estimate

Enter an area above to see your estimate

Put in the width and height of the wall you need done and the estimate will appear here, with scaffolding shown as its own line so you can see exactly what it adds.

Step 2

Want this checked by a specialist?

Send your estimate over and we'll tell you straight whether the numbers look right for your property. Free, no obligation, no pressure.

Your details go to Rosser Brickwork & Repointing Services Ltd. We don't pass them to anyone else without telling you first.

How repointing is priced in the UK

Repointing is almost always priced by the square metre of wall face, not by the number of bricks or the length of the joints. That makes quotes easy to compare — if two firms are both quoting per m², you can see immediately which is dearer and ask why.

The rate covers raking out the old mortar to a proper depth, mixing a mortar that matches the original in both strength and colour, pointing the joints and finishing them to the right profile. A rate at the lower end of £60–80 per m² usually means straightforward work: sound bricks, mortar that comes out cleanly, easy access. The upper end reflects awkward jobs — hard cement mortar that has to be cut out carefully, soft or historic bricks that damage easily, or joints that need a lime mortar mix.

What pushes the price up

  • —Hard cement mortar on soft old brick. It has to come out slowly, often by hand, to avoid wrecking the brick edges. This is the single biggest driver of a higher rate.
  • —Lime mortar. Needed on most pre-1920s solid-wall properties. It is more expensive, slower to work with and has to be protected while it cures.
  • —Replacing spalled bricks. If frost has blown the faces off bricks, cutting them out and replacing them is separate work on top of the pointing.
  • —Height and access. Not through the rate — through the scaffolding, which is why it belongs on its own line.

Why scaffolding is always extra

Scaffolding is hired in from a scaffolding contractor, erected, left up for the duration of the job and then taken down. On a standard two-storey house that is typically £500–£1,000. Three storeys, a tight side passage, a conservatory in the way or a chimney stack all push it higher.

If a quote gives you one all-in number and says nothing about access, ask directly whether scaffolding is included. Either it is buried in an inflated per-m² rate, or it is coming as a variation later. Neither is what you want to find out halfway through.

Is this a quote?

No — it is a budgeting tool, and it is honest about that. Nobody can price brickwork properly without looking at it. What the calculator gives you is a realistic range built from real rates, so you can tell whether the numbers you get back from tradespeople are sensible. If a quote comes in at half the bottom of this range, that is worth asking questions about.