How to Tell If Your House Needs Repointing
Crumbling mortar, damp patches, and gaps between bricks — these are the warning signs every UK homeowner should know. Here's how to spot repointing problems before they cause serious damage.
Daniel Rosser
Published 15 September 2026
If you own an older property in the UK, repointing is one of those maintenance jobs that's easy to put off — until it becomes a much bigger, much more expensive problem. Mortar doesn't last forever, and when it starts to fail, the damage can spread quickly.
The good news is that your house will tell you when it needs repointing. You just need to know what to look for. Here are the signs to watch out for, and what to do if you spot them.
What Is Repointing, and Why Does It Matter?
Repointing is the process of removing old, damaged mortar from between your bricks and replacing it with fresh mortar. The mortar joints (the lines between bricks) are there to keep water out, hold the bricks in place, and allow the wall to "breathe."
Over time — typically 30 to 50 years for traditional lime mortar, and 15 to 25 years for modern cement mortar — weather, moisture, and general aging cause the mortar to erode, crack, or crumble. When that happens, water gets in. And water in your walls is never good news.
Failed pointing can lead to:
- Damp problems — water seeps through the joints into the interior of your home
- Frost damage — water freezes in the mortar and bricks, causing them to crack and spall
- Structural issues — bricks can shift or loosen when the mortar holding them degrades
- Higher energy bills — gaps in mortar let cold air in and warm air out
- Reduced property value — visible damaged pointing puts off buyers and surveyors
7 Signs Your House Needs Repointing
1. Mortar Is Crumbling or Falling Out
This is the most obvious sign. Take a close look at the mortar joints on your external walls. If the mortar is powdery, crumbling, or has actually fallen out leaving gaps between bricks, repointing is needed. You can test this by running a key or screwdriver along the joint — if mortar crumbles away easily, it's past its best.
2. Gaps in the Mortar Joints
Look for areas where the mortar has receded back from the face of the brick. If you can see a visible gap or the mortar sits well behind the brick surface, water will collect in that gap and accelerate the damage. Even small gaps are worth addressing — they don't fix themselves.
3. Damp Patches on Interior Walls
If you're seeing damp patches on your internal walls — particularly on external-facing walls — failed pointing is a common culprit. The moisture gets through the degraded mortar joints and shows up as damp patches, peeling wallpaper, or mould growth inside. If you've ruled out plumbing leaks and rising damp, check your pointing.
4. Cracks in the Mortar or Bricks
Vertical or stair-step cracks following the mortar joints are a sign that the wall is under stress. This could be due to settlement, subsidence, or simply failed mortar allowing movement. Either way, cracked mortar needs assessment — and likely repointing, possibly combined with structural repair.
5. Bricks Are Spalling or Flaking
Spalling is when the face of a brick flakes off, leaving a rough, pitted surface. This usually happens because water has got into the brick through failed mortar joints, then frozen and expanded. If you see spalling bricks alongside degraded mortar, the pointing needs to be addressed to prevent further brick damage.
6. Vegetation Growing in the Joints
If moss, ivy, or weeds are growing out of your mortar joints, it means the mortar has degraded enough to allow seeds and roots to take hold. Plants in your mortar joints will accelerate the damage as roots grow and expand. Remove the vegetation and get the joints repointed.
7. The Mortar Looks Different in Patches
If parts of your wall have been repointed at different times with different mortar, you'll see colour and texture variations. This isn't always a problem, but if older sections are clearly degrading while newer sections are fine, it's a sign that the remaining old mortar is reaching the end of its life.
How to Check Your Pointing Properly
Here's a simple method for checking the condition of your mortar:
- Walk around your property on a dry day and look at all external walls at eye level
- Use binoculars to check upper floors and chimneys — these are exposed to more weather and often degrade faster
- Run a key along a few joints at different points — if mortar crumbles easily, it's failing
- Look for water staining below joints — this indicates water is getting in
- Check after heavy rain — look for dark patches on walls that take a long time to dry
- Inspect chimneys carefully — chimney pointing degrades fastest due to exposure
Don't Wait — Small Problems Become Big Ones
The thing about failed pointing is that it doesn't stay the same. Once mortar starts to degrade, the process accelerates. Water gets in, freezes in winter, expands, and pushes more mortar out. More mortar falls out, more water gets in. It's a cycle that only gets worse.
A small repointing job that might cost a few hundred pounds now can become a major repair running into thousands if left too long. And if bricks start spalling or structural movement occurs, you're looking at a much bigger project.
DIY or Hire a Professional?
Repointing looks simple, but doing it properly requires skill and the right materials. The most common DIY mistake is using the wrong mortar mix — particularly using hard cement mortar on older properties that need lime mortar. This can trap moisture and cause more damage than it fixes.
If you're comfortable with DIY and have a small, accessible area to repoint, it's doable. But for anything larger, anything at height, or anything on an older property, it's worth getting a specialist in.
Want a Professional Assessment?
If you've spotted any of these signs and want a professional opinion, we can help. Rosser Brickwork & Repointing Services Ltd covers Basingstoke, Hampshire, Berkshire and Surrey — fully insured, free quotes, no pressure.
Need a Professional?
Get a Free Quote from a Brickwork Specialist
If you're in Hampshire, Berkshire or Surrey, Rosser Brickwork & Repointing Services Ltd can handle your repointing, chimney repairs or brick restoration. Fully insured, free quotes, no pressure.