Chimney Breast and Chimney Stack Removal Cost UK 2026: What Changes the Price
Chimney removal can't be priced per square metre. Size, access and whether the breast is load-bearing decide the cost. Here are real UK price ranges and what to ask before you book.
Daniel Rosser
Published 28 October 2026
Chimney removal is one of those jobs where two quotes for the same house can be hundreds, or even thousands, of pounds apart. That is not because one builder is cheating you. It is because the price depends on things you cannot see from the garden, and the biggest one is whether the chimney breast is holding up the building.
This guide explains what chimney breast and chimney stack removal costs in the UK in 2026, what changes the price, and what to ask before you agree to any work. It is written from the point of view of a brickwork firm that takes down chimneys regularly.
Chimney Breast vs Chimney Stack: What Is the Difference?
People use the terms loosely, but they are different jobs with different costs.
- Chimney breast: the part inside the house. It is the bulge of brickwork on the wall, usually containing the old fireplace and flue. Removing it gives you the floor space back.
- Chimney stack: the part above the roofline, including the chimney pots. Removing it is usually done to stop leaks, fix an unsafe stack, or because the fireplaces below are no longer used.
You can remove the stack and leave the breast, remove the breast and leave the stack, or take out both. Each combination has its own cost and its own risks.
Why Chimney Removal Cannot Be Priced Per Square Metre
Jobs like repointing can be priced per square metre, because the work is the same wherever you do it. Chimney removal does not work that way. Two chimney breasts of the same size can need completely different work depending on what they support.
The price comes down to three things:
- The size of the stack or breast
- Access to the job
- Whether the breast is part of the building's main structural spine
Any quote that gives you a flat price without asking about these three things is a guess.
1. Size of the Stack or Breast
A small single-flue stack is a very different job to a large breast with multiple flues, or a stack serving fireplaces on several floors. More brick means more labour, more rubble to clear and more skip loads.
Two floors of breast take roughly twice the work of one. A wide stack with several pots and flues takes longer to dismantle by hand than a narrow one.
2. Access
Access affects both the stack and the breast.
- Stack removal needs scaffolding. Working at height on a roof is not something to do from a ladder. Scaffolding is a separate cost, typically from £500 to £1,000 or more depending on the height, the width of the house and how long it needs to stay up.
- Breast removal needs a way to get rubble out. A ground-floor room with a door to the garden is simple. A third-floor bedroom means carrying everything down the stairs, which takes longer.
- Terraced and tight sites cost more. If the skip cannot be placed close, or the roof is hard to reach, expect the price to go up.
3. Is the Chimney Breast Load-Bearing?
This is the factor that changes the price the most. In many older UK houses, the chimney breast is part of the main structural spine of the building. It may be supporting the chimney stack above, the floors and ceilings on either side, or the wall itself.
If you remove a load-bearing breast without proper support, you risk sagging floors, cracked walls and, in the worst case, partial collapse. Because of this, removing a load-bearing breast is a different type of project altogether.
If the breast is load-bearing
You will need:
- Structural support: usually either gallows brackets (which carry the stack above while the breast below is removed) or a steel beam across the opening
- A structural engineer to inspect the property, specify the support and produce calculations
- Building regulations approval from your local authority building control, or an approved inspector
All of this adds cost and adds time. The steel, the engineer's fee, the building control fee and the extra labour all go on top of the basic removal price.
If the breast is non-structural
Some chimney breasts do not support anything. In that case the job is simpler: take down the brickwork, make good the wall and ceiling, and clear the rubble. It is quicker and cheaper, because there is no steel, no engineer and no building regulations application for the structural element.
You cannot tell which type you have by looking. It needs an inspection, and ideally an engineer's opinion, before any bricks come out.
How Much Does Chimney Removal Cost in the UK?
Because every job differs, treat these as rough guide ranges for 2026 rather than fixed prices. Costs are higher in London and the South East.
| Job | Typical guide cost | What drives the price |
|---|---|---|
| Chimney stack removal (above roofline) and making the roof good | From around £1,000 to £3,000 plus scaffolding | Stack size, roof type, number of flues |
| Non-structural chimney breast removal (one floor) | From around £1,000 to £2,500 | Size, access, making good plaster and flooring |
| Non-structural breast removal (multiple floors) | From around £2,000 to £5,000 | Number of floors, rubble removal |
| Load-bearing breast removal with support | Often £3,000 to £8,000 or more including engineer and steel | Gallows brackets or beam, engineer, building control |
| Scaffolding (separate line) | £500 to £1,000+ | Height, access, duration |
These ranges are indicative only. A proper figure needs someone to look at the property. If a quote is far below these ranges for a structural job, ask what is missing.
Costs That Are Easy to Overlook
The removal itself is only part of the bill. Ask whether the quote includes:
- Scaffolding for stack removal, often quoted separately
- Making good: plastering, ceilings, skirting, flooring and decoration where the breast stood
- Roof repairs: capping the flue, re-tiling or patching the roof where the stack came out
- Skip hire and waste removal: a full breast produces a large amount of rubble
- Structural engineer's fee, if the breast is load-bearing
- Building control fees
- Ventilating the remaining flue, if you are removing only part of the chimney
Do You Need Building Regulations Approval?
Often, yes. Removing a chimney breast, or part of it, is notifiable building work in England and Wales when it affects the structure. You will usually need to involve building control, who will want to see the engineer's calculations and inspect the work.
If you ever sell the house, a buyer's solicitor may ask for the completion certificate. Work done without approval can hold up a sale or lead to costly rectification. A reputable contractor will tell you this at the start, not after the work is finished.
Can You Remove the Chimney Breast but Keep the Stack?
Yes, and it is a common request when homeowners want the room back but still need the roofline to look right. The stack above is then supported on gallows brackets, or on a steel beam, once the breast below has been removed. This is exactly the kind of job where the load-bearing question matters and where proper support is not optional.
Should You Remove the Stack Only?
Sometimes a leaning, damaged or leaking stack is the real problem, and the breast inside is fine. Taking the stack down below the roofline and capping it can be cheaper than a repair, particularly if the fireplaces are never used. You do need to keep the remaining flue ventilated so that damp does not build up inside the breast.
If the stack is simply weathered, a repair may cost less than removal. Our guide to repointing costs explains the cost of repointing brickwork, and the chimney is often one of the first places mortar fails because it is so exposed.
Can You Do Chimney Removal Yourself?
We would strongly advise against it. The risks are real:
- You cannot tell by eye whether the breast is structural
- Removing the wrong bricks can bring down the stack, the floors or both
- Working on a roof without scaffolding is dangerous
- Rubble weight is enormous and the dust is harmful
- Work without building control sign-off can cause problems when you sell
This is a job for a competent brickwork firm, and for a structural engineer where support is involved.
How to Get an Accurate Quote
- Get at least two or three quotes. Make sure each one is based on a site visit, not just a phone call.
- Ask about the structure. A good contractor will want to know whether the breast is load-bearing, and will tell you if an engineer is needed.
- Ask what is included. Scaffolding, making good, rubble removal and building control should all be clearly listed.
- Check insurance. The firm should carry public liability insurance. Ask to see it.
- Get it in writing. A written quote with a clear scope protects both sides.
Need a Professional?
If you are in Hampshire, Berkshire or Surrey and are thinking about removing a chimney breast or chimney stack, we can take a look, tell you plainly what the job involves and give you a free, honest quote with no pressure. We are brickwork and repointing specialists, not general builders, and we are fully insured.
Message us on WhatsApp for a free quote, or visit rosserbrickwork.co.uk to find out more about our services. You can also use our cost calculator if your chimney also needs repointing.
Frequently Asked Questions
How much does it cost to remove a chimney breast?
A simple non-structural breast on one floor can start at around £1,000 to £2,500. A load-bearing breast needing steel, an engineer and building control is often £3,000 to £8,000 or more. Scaffolding for stack work is extra.
How much does chimney stack removal cost?
Expect roughly £1,000 to £3,000 for the work, plus £500 to £1,000 or more for scaffolding, depending on the size of the stack and the roof.
Is my chimney breast load-bearing?
You cannot tell by looking. Many are, particularly in older terraced and semi-detached houses. A builder or structural engineer needs to inspect it.
Do I need a structural engineer?
If the breast is load-bearing or supports a stack above, yes. They specify the support and provide the calculations that building control will want to see.
Will removing a chimney breast add value?
It can, because it gives you usable floor space. But poorly done work, or work without building control sign-off, can put buyers off.
Can I remove the chimney if I still use the fireplace?
Not without losing the fireplace. If you still use a stove or open fire, the flue and stack need to stay in good condition, and repair or repointing may be the better option.
Free Tool
Work Out Your Own Repointing Cost
Put in your wall measurements and get a cost range built from the real rates on this page — £60–80 per m² — with scaffolding shown as its own separate line rather than hidden in the total.
Open the Cost CalculatorNeed a Professional?
Get a Free Quote from a Brickwork Specialist
If you're in Hampshire, Berkshire or Surrey, Rosser Brickwork & Repointing Services Ltd can handle your repointing, chimney repairs or brick restoration. Fully insured, free quotes, no pressure.